Cheap Price Vac Bed

A highly demanded piece to add to our bed collection. The Vac Bed is placed over a mattress like a bed sheet and has a simple large opening at the bottom to climb into. Fold the opening back under the bed to create a sealed end and make sure your mouth is level with the breathing hole. It has straps going under the mattress pulling it taught and keeping it in place. It doesn’t “untuck” itself as the straps keep if in place. Slip the end of a hoover nozzle into the hole provided at the side. The Vac Bed creates a tight sensation all over the body.

The vac bed does not come with a valve, so constant suction is required. If sealed correctly the vac bed should last about 3-4 mins once a hoover has been removed. PVC pipes are not required, it does require some wriggling of the person inside to get the air sucked out. We used a Hetty hoover on the shoot which is 620 watts. Made in 0.40mm latex. Seen here in Black. Mattress shown here is a Double. To fit a standard mattress depth of up to 28cm / 11″. Will stretch up to 10cm extra if you have a slightly larger mattress.

WARNING

Please note: our hoods with restricted features should be worn with extreme care, and a trusted partner should always be on hand to take remedial actions as required. If you experience any adverse effects, stop use immediately.

The item must not be used whilst under the influence. You are responsible for the safe use of this garment.

INSTRUCTIONS ON HOW TO USE YOUR VAC BED

The Vac Bed fits onto your bed mattress the same as a fitted sheet

Depending on the size of your Vac bed, you will receive a certain number of straps, they come in two different lengths.

These straps press stud to the edge of the fitted sheet and fit between your mattress and bed helping secure the Vac bed to the mattress.

Once the Vac Bed is secured to the mattress, climb into the vac bed through the simple large opening at the bottom, make sure you mouth is level with the breathing hole, a trusted partner must then seal the large opening by folding it back onto itself and then folding it under the mattress.

Slip the end of a hoover nozzle into the latex tube on the side of the Vac Bed and switch on your hoover to create a tight sensation all over the body.

It is recommended to wriggle around to help the air flow out around the body.

Enjoy!